DUAL COMBINATION TESTER

SKU: 770758

You Pay $1,492.58

Lead Time

4-6 Weeks for non-stocked items, Call for stock inquiries.

Currency

Product Highlights

Tests Operator’s Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms¹
Determines that operator’s personnel grounding devices (wrist straps², foot grounders, ESD shoes, smocks³) are functioning correctly.
Compatible with Single-Wire and Dual-Wire Wrist Straps
See SCS Single-Wire Wrist Straps and Dual-Wire Wrist Straps
Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds
Reduces time spent testing personal grounding devices used in ESD Control Plans
Solid-State Test Switch with No Moving Parts
Maintains accuracy of tests and extends the lifetime of the tester
Split Foot Plate for Testing Foot Grounders (or ESD Shoes)
Tests both foot grounders independently at the same time
30 Volt Test Signal
Provides accurate tests that are not humidity dependent
Relay for Use with Automatic Doors or Other Locking Systems
Controls access to ESD Protected Areas
Optional Stand
Use the SCS 770759 stand as an alternate installation method for the Dual Combination Tester
Calibration Verification
Use the SCS 770769 Limit Comparator to check the test limits of the Dual Combination Tester without removing it from the workplace
NIST Calibrated – Original Calibration Certificate can be Downloaded Here
Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of SCS products, see Calibration.
100-240VAC Power Adapter with Interchangeable Plugs
Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe
Made in the United States of America
This item is made and stocked in Chino, CA

Default test limits listed. Additional test settings are noted in the user guide.
The Dual Combination Tester can verify both single-wire and dual-wire wrist straps.
The Dual Combination Tester will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 10⁷ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.