STATGUARD CONDUCTIVE EPOXY COATING LIGHT GRAY, 4 GAL KIT
SKU: 46057
You Pay
$3,071.90
Lead Time
4-6 Weeks
Currency
Product Highlights
- Conductive Epoxide Polymer Floor Coating
Provides a flooring surface that does not generate a static charge and will act as part of the path-to-ground for an operator wearing ESD footwear. - Conductive (Rtt and Rtg 1 x 104 to < 1 x 107 ohms per ANSI/ESD STM7.1 or IEC 61340-4-1)
The surface resistance range will remain low enough to act as a path-to-ground with normal dirt and grime build-up on a floor and meet the required limits of ANSI/ESD S20.20 (< 1 x 109 ohms) for a footwear / flooring system. - One Coat, 2-part, Water-Based Epoxy System
Mix 4 gallon pre-measured part A and B together and install with squeegee and nap roller. - 50% Solids by Volume
Reduces dry time. Estimated Coverage Per Gallon = 200 sq ft. at 8 mil (0.008" thick). - Statguard® Conductive Epoxy should not be allowed to freeze. If the epoxy part A or part B freezes surround the closed container with hot water to thaw completely and melt the crystals back into liquid. Make sure epoxy is then brought up to room temperature 70°F (20°C) before mixing and using. Store at temperatures above 50 °F (10°C) as stated in the Safety Data Sheet.
- Made in the United States of America
Made and Stocked in Canton, MA.