STATGUARD LOW-VOC FLOOR FINISH 1 GAL

• Static Dissipative Zinc Free Floor Finish
  Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
• Dissipative (1 x 10⁷to < 1 x 10⁹ohms) Coating - ANSI/ESD S7.1 and ESD TR53
  Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
• Low Tribocharging (
  Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring
• Low-VOC
  Meets CARB and other regional VOC requirements
• 23% Solids- 2 Coat System**
  Reduces labor needed for initial install and on-going maintenance of the floor
• Better Hardness vs. Leading Competition ASTM Standard D2134.93
  Resists wear in order to maintain ESD performance longer
• UL Listed for Slip Resistance
  Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate users liability exposure
• Bag-In-Box Packaging
• If Statguard Low-VOC Floor Finish freezes, allow it to thaw to 70F before application.
• Lead-free RoHS Compliant
• Trouble shoot common floor care problems.Click HERE.
• Made In the United States of America
  This item is made and stocked inCanton, MA

*Statguard Low-VOC does not contain harmful chemicals:

• NOAPE (alkylphenol ethoxylates) surfactants
• NOCarcinogens, Mutagens, or Reproductive Toxins
• NOOzone-depleting compounds
• NOAmmonia
• NOHeavy metals (Zinc Free)
• NOFlammable components
• NOComponents toxic to aquatic life

**Some extra high traffic areas may require an initial 3 coat application.