STATIC SHIELD BAG, 1500 SERIES METAL-OUT, 10x28, 100 EA

• Dissipative Dual Layer Rubber Material
  Provides a worksurface that does not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface.
• Dissipative (1 x 10⁶ to <1 x 10⁹ ohms Rtt) Top Color Layer
  Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items.
• Conductive (<1 x 10⁴ Rtt) Black Bottom Layer
  Reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the mats to be used with ESD workstation monitors.
• High Strength Nitrile Rubber Compound
  Designed to withstand abrasion, stretching, and tearing and may be used in soldering applications with flux and other chemicals.
• Grounding Hardware is not included

Mat rolls need to be unrolled before being cut. When rolled, some shrinkage may occur. Please allow time for mat to relax at room temperature 24-48 hours prior to cutting.

Due to variations in computer monitor displays, color shown may not be exact.  For true accurate color, please email Service@StaticControl.com to request an actual sample.